Til kassen
Totalt: 0,-

Logg inn

Handlekurv / 0 produkter

Handlekurven er tom

Usikker på hvor du skal starte?
Se våre nyheter
Til kassen
Total: 0,-

This Enless Wireless LoRa receiver is compatible with PLCs with an RS485 or an RS232 Modbus RTU interface. The receiver also manages Modbus over IP communication. 

The Modbus receiver is used to collect data from our LoRa transmitters (Enless sensors only).

The LoRa Modbus receiver can handle up to 40 transmitters.

The transmitter information is stored in the receiver Modbus table. The PLC can then read the registers of the receiver to retrieve the data. It is also possible to write to the Modbus table of the receiver to re-configure already installed transmitters and add new ones.

The receiver is powered externally (either directly via the PLC power supply or via a power supply unit).

This product is LoRa compatible (not LoRaWAN). It allows you to build a radio private LoRa Enless Wireless mode.

Enless Wireless Modbus receiver LoRa – IP and RTU RS485 / RS232

På lager: 1
Art.nr: RX MODBUS 500-302
4.200,-
Vennligst velg

This Enless Wireless LoRa receiver is compatible with PLCs with an RS485 or an RS232 Modbus RTU interface. The receiver also manages Modbus over IP communication. 

The Modbus receiver is used to collect data from our LoRa transmitters (Enless sensors only).

The LoRa Modbus receiver can handle up to 40 transmitters.

The transmitter information is stored in the receiver Modbus table. The PLC can then read the registers of the receiver to retrieve the data. It is also possible to write to the Modbus table of the receiver to re-configure already installed transmitters and add new ones.

The receiver is powered externally (either directly via the PLC power supply or via a power supply unit).

This product is LoRa compatible (not LoRaWAN). It allows you to build a radio private LoRa Enless Wireless mode.

×
Produktet du valgte er lagt i handlekurven